COOLANT AND WATER FOR DILUTION HANDLING KOMATSU

COOLANT AND WATER FOR DILUTION


The coolant has the important function of preventing corrosion as well as preventing freezing.

Even in the areas where freezing is not an issue, the use of antifreeze coolant is essential.

Komatsu machines are supplied with Komatsu Supercoolant (AF-NAC). Komatsu Supercoolant (AF-NAC) has excellent anticorrosion, antifreeze and cooling properties and can be used continuously for 2 years or 4000 hours.


Komatsu Supercoolant (AF-NAC) is strongly recommended wherever available.

When diluting the antifreeze coolant, use distilled water or tap water (soft water).

Natural water, such as a river water or well water (hard water), contains large amounts of minerals (calcium, magnesium, etc.), and this makes it easier for scale to form inside the engine or radiator. Once scale is deposited inside the engine or radiator, it is extremely difficult to remove. It also causes overheating due to poor heat exchange, so when you dilute the coolant, we recommend that you use water with an overall hardness of less than 100 PPM.

When using antifreeze, always observe the precautions given in the Operation and Maintenance Manual.

Antifreeze coolant is flammable, so be sure to keep it away from flame.
The ratio of Supercoolant (AF-NAC) to water differs according to the ambient temperature.

For details of the ratio when mixing, see "CLEAN INSIDE OF COOLING SYSTEM (PAGE 4-32)".

Supercoolant (AF-NAC) may be supplied already mixed. In such cases, never dilute with water.
If the engine overheats, wait for the engine to cool before adding coolant.
If the coolant level is low, it will cause overheating, and will also cause problems with corrosion due to air entering the coolant.

Post a Comment

أحدث أقدم